![]() The wiring of this receiver is placed inside the fan canopy, while the other receivers are installed into a wall. The remote-control receiver goes inside the fan canopy for starters. In case you want to install a remote-controllable receiver to follow your commands from the comforts of your couch, only a few additional steps will be required. Follow the installation specifications to install the glass shade. Fix your light bulb in, as per the prescribed wattage. Then, use screws to fasten the shade filter plate. Connect the arms of the blade with the motor, motor screws, and lock washers. Ensure the blades are firmly tightened post-installation. Secure all the arms of the blade under the blade and use screws and washers to keep them in place. Use motor housing to cover the motor assembly and tighten it securely in its place with the help of screws. Then, take the screws of the mounting brackets out and add a lock in the washers. ![]() Use screws and flat washers to secure the motor assembly to the bracket. ![]() The motor assembly must be aligned to the ceiling’s mounting brackets. This information on wires is of utmost importance and if your wiring looks like any other shade not mentioned here, you must abort the installation process immediately and contact a professional installer or electrician. The white one is for the fan and light kit. The blue wire stands for hot power for the light kit. The wired for installation will be in standard colors like white, green, blue, and black. Carefully remove the motor screws and lock washers from the motor. It is crucial for the mounting bracket to be secured efficiently to avoid injuries. Your fan gets its primary support from this mounting bracket. Use spring washers, screws, and flat washers to secure the mounting bracket to the outlet box. In case the fixture is not sealed tightly, you will need an expandable mounting bracket. If the fixture is inside a plastic box, you will have to replace it with a steel one. Make sure you have a hot head that suggests electricity is not currently running through the line.Īfter putting off the power, take out the fixture already existing in the ceiling. ![]() When you begin the installation process, ensure the switches are put off on the main breaker. Ensure you have conducted proper research and gathered permits (if required) for the installation process. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |